The expansion tanks of the ultitube series are equipped with a tube made of borosilicate glass, which, in contrast to the plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ultitube series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. An aqua computer d5 pwm pump is mounted directly on the bottom of the expansion tank. The performance of the pump can be set using a pwm signal, and a speedometer signal is also available to monitor the pump function. The pump's electronically commutated ball motor runs extremely quietly and has a long service life. When developing the expansion tank, care was also taken to ensure optimum flow behavior, the result being extremely quiet and smooth operation of the pump. Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical specifications: filling volume: approx. 230 ml connection thread: g1 / 4 operating voltage: 8 - 24 v dc power consumption: 23 w (at 12 v) pressure at 12 v: 3.7...
Price now:
From
to
Cronologia dei prezzi:
Dettagli:The expansion tanks of the ultitube series are equipped with a tube made of borosilicate glass, which, in contrast to the plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ultitube series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. An aqua computer d5 pwm pump is mounted directly on the bottom of the expansion tank. The performance of the pump can be set using a pwm signal, and a speedometer signal is also available to monitor the pump function. The pump's electronically commutated ball motor runs extremely quietly and has a long service life. When developing the expansion tank, care was also taken to ensure optimum flow behavior, the result being extremely quiet and smooth operation of the pump. Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical specifications: filling volume: approx. 230 ml connection thread: g1 / 4 operating voltage: 8 - 24 v dc power consumption: 23 w (at 12 v) pressure at 12 v: 3.7...
Price now:
From
to
Galaxus IT
1.83% ( -3,43 €)
Nuovo
184,32 €
ePRICE 2022 IT
0.80% ( -2,05 €)
255,09 €
257,14 €
eBay | 161,31 €7,90 € Consegna | Memorizzare |
Galaxus IT | 184,32 €Consegna gratuita | Memorizzare |
255,09 €5,99 € Consegna | Memorizzare |
The expansion tanks of the ultitube series are equipped with a tube made of borosilicate glass, which, in contrast to the plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ultitube series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. An aqua computer d5 pwm pump is mounted directly on the bottom of the expansion tank. The performance of the pump can be set using a pwm signal, and a speedometer signal is also available to monitor the pump function. The pump's electronically commutated ball motor runs extremely quietly and has a long service life. When developing the expansion tank, care was also taken to ensure optimum flow behavior, the result being extremely quiet and smooth operation of the pump. Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical specifications: filling volume: approx. 230 ml connection thread: g1 / 4 operating voltage: 8 - 24 v dc power consumption: 23 w (at 12 v) pressure at 12 v: 3.7...
General | |
---|---|
Brand | Aqua Computer |
Material | acciaio |
Size | Medio |
I venditori offrono una gamma di opzioni di consegna, quindi puoi scegliere quella che è più conveniente per te. Molti venditori offrono la consegna gratuita. Puoi sempre trovare il costo dell'affrancatura e la data di consegna stimata in un elenco del venditore. Potrai quindi visualizzare un elenco completo delle opzioni di consegna durante il checkout. Questi possono includere: Consegna espressa, Consegna standard, Consegna in economia, Click & Collect, Ritiro locale gratuito dal venditore.
Le opzioni per la restituzione di un articolo variano in base a ciò che si desidera restituire, al motivo per cui si desidera restituirlo e alla politica di restituzione del venditore. Se l'articolo è danneggiato o non corrisponde alla descrizione dell'inserzione, puoi restituirlo anche se la politica di restituzione del venditore afferma che non accetta resi. Se hai cambiato idea e non desideri più un articolo, puoi comunque richiedere un reso, ma il venditore non deve accettarlo. Se l'acquirente cambia idea su un acquisto e desidera restituire un articolo, potrebbe essere necessario pagare le spese di spedizione per la restituzione, a seconda della politica di restituzione del venditore. I venditori possono fornire un indirizzo postale per la restituzione e ulteriori informazioni sulla spedizione per l'acquirente. I venditori pagano per le spese di reso in caso di problemi con l'articolo. Ad esempio, se l'articolo non corrisponde alla descrizione dell'annuncio, è danneggiato o difettoso o è contraffatto. Per legge, i clienti nell'Unione Europea hanno anche il diritto di annullare l'acquisto di un articolo entro 14 giorni a partire dal giorno in cui ricevi, o una terza parte da te indicata (diversa dal corriere) riceve, l'ultimo bene ordinato da te (se consegnato separatamente). Questo vale per tutti i prodotti ad eccezione degli articoli digitali (ad es. Musica digitale) forniti immediatamente con il riconoscimento e di altri articoli come video, DVD, audio, videogiochi, prodotti Sex and Sensuality e prodotti software in cui l'oggetto è stato non sigillata.
I venditori devono offrire un rimborso per determinati articoli solo se difettosi, come ad esempio: articoli personalizzati e articoli su misura, articoli deperibili, giornali e riviste, CD non confezionati DVD e software per computer. Se hai utilizzato il tuo saldo PayPal o conto bancario per finanziare il pagamento originale, i soldi rimborsati torneranno al saldo del tuo conto PayPal. Se hai utilizzato una carta di credito o di debito per finanziare il pagamento originale, i soldi rimborsati torneranno sulla tua carta. Il venditore effettuerà il rimborso entro tre giorni lavorativi, ma Paypal potrebbe impiegare fino a 30 giorni per elaborare il trasferimento. Per i pagamenti finanziati in parte da una carta e in parte dal tuo saldo / banca, i soldi prelevati dalla tua carta torneranno sulla tua carta e il resto tornerà sul tuo saldo PayPal.